Tee Pipe Welding Butt Steel
Tee
Stuth: stàilinn gualain, stàilinn gun staoin, stàilinn alloy
Teicnigeach: Air a chruthachadh agus a ’putadh
Ceangal: Welding
Coitcheann: ANSI, ASME, AP15L, DIN, JIS, BS, GB
Seòrsa: 45 ° agus 90 ° LR / SR Elbow, Lùghdaich, Tee, cromadh, Cap, Crois.
Tiugh balla: SCH5-SCH160 XS XXS STD
Surface: Paint Dubh / Ola dìon-meirge / Galvanised teth air a bhogadh
Ceàrnan: 30/45/60/90/180 °
Meud: 1/2 ”-80” / DN15-DN2000
Teisteanas: ISO -9001: 2000, API, CCS
Iarrtas: Gnìomhachas Ceimigeach, Gnìomhachas Petroleum, Gnìomhachas Togail is eile
Sgrùdadh: Sgrùdadh Taobh a-staigh Factaraidh no Sgrùdadh Treas Pàrtaidh
Pacadh: Pallets plywood / cùis fiodha no a rèir an t-sònrachadh agad
ASME B16.9, B16.28
| Meud na pìoba | A h-uile inneal | 90 & 45 Elbows agus Tees | Lùghdaich agus Lap Joint Stub a ’tighinn gu crìch | Caps | |||||||
|
| Trast-thomhas taobh a-muigh aig Bevel, D (1) | Trast-thomhas a-staigh aig deireadh (1) | Tiugh balla t | Meudan Ionad-gu-Deireadh A, B, C, M. | Fad iomlan, F, H. |
| |||||
|
|
|
|
|
|
| Fad iomlan, E. | |||||
|
|
|
|
|
|
|
| |||||
|
| IN | MM | IN | MM |
| IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | +0.06 | +1.6 | ± 0.03 | ± 0.8 | Nas lugha na 87.5% de thiugh ainmeach | ± 0.06 | ± 2 | ± 0.06 | ± 2 | ± 0.12 | ± 3 |
|
| -0.03 | -0.8 |
|
|
|
|
|
|
|
|
|
| 3 ~ 2½ | ± 0.06 | ± 1.6 | ± 0.06 | ± 1.6 |
|
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
|
|
|
|
|
| 5 ~ 8 | +0.09 | +2.4 |
|
|
|
|
|
|
| ± 0.25 | ± 6 |
|
| -0.06 | -1.6 |
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0.16 | +4.0 | ± 0.12 | ± 3.2 |
| ± 0.09 |
| ± 0.09 |
|
|
|
|
| -0.12 | -3.2 |
|
|
|
|
|
|
|
|
|
| 20 ~ 24 | +0.25 -0.19 | +6.4 -4.8 | ± 0.19 | ± 4.8 |
|
|
|
|
|
|
|
| 26 ~ 30 |
|
|
|
|
| ± 0.12 | ± 3 | ± 0.19 | ± 5 | ± 0.38 | ± 10 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 32 ~ 48 |
|
|
|
|
| ± 0.19 | ± 5 |
|
|
| |
| Meud na pìoba | Crìoch Lap Co-chrìochnach (2) | 180 lùb air ais | ||||||||||
|
| Trast-thomhas taobh a-muigh Lap, G. | Lap tiugh | Radius Fillet de Lap, R. | Meud Ionad-gu-Ionad, O. | Air ais gu- Meud Aghaidh, K. | Co-thaobhadh de Crìoch, U. | ||||||
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| ||||||
|
| IN | MM | IN | MM | IN | MM | IN | MM | IN | MM | IN | MM |
| ½ ~ 2½ | +0 -0.03 | +0 -1 | +0.06 -0 | +1.6 -0 | +0 -0.03 | +0 -1 | ± 0.25 | ± 6 | ± 0.25 | ± 6 | ± 0.03 | ± 1 |
| 3 ~ 2½ |
|
|
|
|
|
|
|
|
|
|
|
|
| 4 |
|
|
|
| +0 -0.06 | +0 -2 |
|
|
|
|
|
|
| 5 ~ 8 |
|
|
|
|
|
|
|
|
|
|
|
|
| 10 ~ 18 | +0 -0.06 | +0 -2 | +0.12 -0 | +3.2 -0 |
|
| ± 0.38 | ± 10 |
|
| ± 0.06 | ± 2 |
| 20 ~ 24 |
|
|
|
|
|
|
|
|
|
|
| |
| Meud na pìoba | Off Angle, Q. | Off Plane, P. | ||
|
| IN | MM | IN | MM |
| ½ ~ 4 | ± 0.03 | ± 1 | ± 0.06 | ± 2 |
| 5 ~ 8 | ± 0.06 | ± 2 | ± 0.12 | ± 4 |
| 10 ~ 12 | ± 0.09 | ± 0.19 | ± 5 | |
| 14 ~ 16 | ± 3 | ± 0.25 | ± 6 | |
| 18 ~ 24 | ± 0.12 | ± 4 | ± 0.38 | ± 10 |
| 26 ~ 30 | ± 0.19 | ± 5 | ||
| 32 ~ 42 | ± 0.50 | ± 13 | ||
| 44 ~ 48 | ± 0.75 | ± 19 | ||
NOTAICHEAN:
Taobh a-muigh na sùim tha suim luachan iomlan fulangas plus agus minus.
Trast-thomhas taobh a-muigh baraille faic an clàr air duilleag 15.